SLY

LED modular linear suspension luminaire, characterized by a very high efficiency, visual comfort and glare control.
Sly was designed also to be installed as continuous row system, suitable for offices, showrooms, supermarkets, open spaces, commercial exhibitions, work areas.

Body: 6/10 steel sheet, painted with polyester powders to guarantee an excellent resistance to chemical agents.
Optics: PMMA, available in 5 possible beams (60°- 90° as standard) developed with innovative ELA (Extended Light Area) and CLC (Constant Light Color) systems.
LED modules: powered at 250mA and 350mA, realized with B/C sys-tem, for the reduction of shadows and reflections. Color temperature: 3000/4000K. CRI> 80.
Expected lifetime: 54.000h L80 B20 @ta25 54.000h L70 B50@tamax.
Power: 220-240V 50/60Hz driver, ripple free, SP system, Active PFC.
Power supply kit: composed of 3x1mm² power cable, L=2,50mt and ceiling base.
Sospension kit: composed of steel tie-rods L=2,50mt.

Product specifically developed for the composition of continuous row systems.

Available on request:
• L=560mm single module version;
• 90° TL, AS, R2A optics;
• DALI dimmable driver;
• internal 1-3h maintained emergency;
• pass-through module;
• pass-through wiring available also with phase inversion for three-phase lines;
• ceiling fixing clips;
• rotating joint (180°).

Product’s luminous flux were calculated taking into account the typical value declared by the LED manufacturer.  Therefore, tolerances on production batches could be considered of +/-5%

The values declared refer to standard coloring 4000K.  If not explicitly indicated, flux could deviates by -5% for 3000K, +5% for 5000/5200K.