Outdoor led floodlight, born to combine an essential and a contemporary design, Antares’ technological evolution. Perfect for lighting areas as gardens, entrances, buildings, forecourts and facades.
Housing and frame: in die-cast aluminum. Housing with cooling fins for maximum heat dissipation. Reflector in satin aluminum.
Lateral goniometric scale for quick tilt adjustment.
Paintwork: thermosetting polyester powder, prior degreasing and phosphochromatizing process that ensure an extremely high resistance to chemical and atmospheric agents.
Safety glass: extra clear tempered 4 mm, glazed front.
LED: Samsung COB D-Gen3, CRI>80, CCT 4000K, SDCM 3.
Lumen maintenance: 50,000h L80 B10 @ta25, 30,000h L80 B10 @ta45.
Power supply: 220 ÷ 240V 50-60Hz with electronic ballast, surge protection up to 4/6kV, prewired cable 60cm 3x1mm² + M20 standard.
Bracket: 4 mm slotted and thick shaped steel.
Available on request:
• DALI dimmable driver and output reduction with Vmidnight system;
• CRI90 version;*
• SPD 12kV;
• special paintwork: colour and type of corrosion painting cycle (C5).
Accessories on request:
• “T” pole adapter ø 40/60 mm;
• protection grid (IK10)*.
CCT 4000K Standard, on request:
3000K, 4000K, 5000K
Product’s luminous flux were calculated taking into account the typical value declared by the LED manufacturer. Therefore, tolerances on production batches could be considered of +/-5%. The values declared refer to standard coloring 4000K. If not explicitly indicated, flux could deviates by -5% for 3000K, +5% for 5000/5200K.
ATTENTION
CRI90 version or any special setup available on request, shall be agreed with the sales representative.