Led floodlight, characterized by a wide range of available optics perfect for lighting urban, industrial and residential areas, sports facilities, entrances, buildings, forecourts. Suitable for relamping discharge lamps- from 250 to 1000W.
Housing and frame: die-cast aluminum. Paintwork: thermosetting polyester powder, prior degreasing and phosphochromatizing process that will ensure an extremely high resistance to chemical and atmospheric agents. Glass: extra clear tempered 4 mm. LED: anti‑sulfur, Samsung LH181B+, CRI>80, CCT 4000K, SDCM 3. Lumen maintenance: 80.000h L80 B10 @ta25, 50.000h L80 B20 @ta45. Power supply: 220 ÷ 240V 50-60Hz with electronic ballast, surge protection up to 6/8-10kV, NTC thermal sensor, low ripple, dimm 1-10V supplied as standard, waterproof fast plug connector. Bracket: 3 mm slotted and thick shaped steel. GORE® Protective Vents system: supplied as standard.
Available on request: • DALI dimmable driver and output reduction with Vmidnight system; • additional optics (ST); • SPD 10kV; • GORE® Protective Vents system; • “T” pole adapter Ø40-60mm; • special paintwork: colour and type of corrosion painting cycle (C5).
Accessories on request: • pole adapter Ø 40-60mm.
CCT 4000K Standard, on request: 2200K, 2700K, 3000K, 5700K
Product’s luminous flux were calculated taking into account the typical value declared by the LED manufacturer. Therefore, tolerances on production batches could be considered of +/-5%. The values declared refer to standard coloring 4000K. If not explicitly indicated, flux could deviates by -5% for 3000K, +5% for 5000/5200K.
ATTENTION CRI90 version or any special setup available on request, shall be agreed with the sales representative
